DAOMI 2.4GHz & 5.8GHz Dual Band WiFi Signal Booster | 4000mW (36dBm) High Power Amplifier (SHRC5824G4W)

Brief introduction

The DAOMI SHRC5824G4W is an elite-level, dual-band Wi-Fi signal booster specifically engineered to push the boundaries of UAV, drone, and RC equipment communication. Delivering a staggering 4000mW (36dBm) of real output power, it supports both 2.4GHz and 5.8GHz frequencies with an intelligent auto-switch capability to guarantee the most stable connection possible. Housed in a precision CNC-machined aluminum alloy case, it provides exceptional anti-interference performance while weighing only 143g. Packed with specialized IPEX cables and header adapters, it is the ultimate high-power solution designed for deep hardware integration and professional FPV setups.

Advantages

·  Extreme 4000mW Power Output: Unleashes a massive 36dBm (4000mW) of bi-directional output power alongside a 16~19dB transmit gain, obliterating signal limits for long-range drone flights.

·  Smart Dual-Band Auto-Switch: Seamlessly operates across 2.4GHz and 5.8GHz bands, automatically switching frequencies to lock onto the cleanest and strongest channel available.

·  Integration-Ready Full Kit: Uniquely packaged with RP-SMA to IPEX cables and a Header2 to Header4 adapter, making it incredibly easy for DIY hobbyists and engineers to integrate directly into drone flight controllers or internal radio modules.

·  Flexible Wide-Voltage Supply: Supports a versatile 5-16V DC input range, allowing the booster to be efficiently powered by standard RC LiPo batteries, power banks, or 12V/2A adapters.

·  Aviation-Grade CNC Casing: The rugged aluminum-alloy enclosure acts as a premium heat sink and shields the internal circuitry from severe electromagnetic interference during flight.

·  Optimized Payload Weight: Despite its massive power output, the highly integrated design keeps the weight down to just 143g, preserving the drone's aerodynamic performance.   

Application scenario

·  Professional UAV & FPV Drones: Drastically extends HD video transmission and telemetry control ranges for drone racing, aerial cinematography, and agricultural surveying.

·  Custom Drone Hardware Integration: Perfect for engineers and RC hobbyists who need to wire high-power signal amplifiers directly into custom drone builds using IPEX and header connectors.

·  RC Vehicles & Heavy-Duty Equipment: Amplifies the operational scope of radio-controlled boats, cars, and customized IP camera security setups in demanding outdoor environments.  

1. Performance & Frequencies:

·  Booster Model: SHRC5824G4W

·  Operating Range: 2.4~2.5GHz & 5.0~5.8GHz (Dual Band)

·  Channel Width: 20MHz & 40MHz & 80MHz

·  Supported Standards: IEEE 802.11b/g/n/a

·  Operation Mode: Bi-directional, half-duplex, Time Division Duplex (TDD)

·  Output Power: 4000mW (36dBm)

·  Input Power: 0 ~ 20dBm

·  Transmit Gain: 16~19dB

·  Receiver Gain: 10dB

·  Noise Figure: ≤3.5dB typical

·  Frequency Response: ±1dB over operating range 

2. Hardware, Power & Mechanical: 

·  Material: Cast Aluminum Alloy (CNC machining)

·  Power Input (Supported Voltages): 5-16V DC

·  Power Adapter: 12V/2A DC, 100~240V

·  LED Indicators: Power status LED and activity status LED

·  Operating Temperature: -20°C to +70°C

·  Operating Humidity: Up to 75% relative humidity

·  Booster Size: 9.4 x 6.3 x 1.7 cm

·  Booster Weight: 143g

3. Integration-Ready Package Contents:

·  1 x SH-RC5824G4W Dual Band WiFi booster

·  1 x RP-SMA-F (Female) to IPEX cable

·  1 x RP-SMA-M (Male) to IPEX cable

·  1 x Header2 to Header4 adapter

·  1 x User Manual